Periodic Materials for Seismic Base Isolation: Theory and Applications to Small Modular Reactors

dc.contributor.advisorMo, Yi-Lung
dc.contributor.advisorNakshatrala, Kalyana Babu
dc.contributor.committeeMemberHsu, Thomas T. C.
dc.contributor.committeeMemberFreundlich, Alex
dc.contributor.committeeMemberChen, Jinghong
dc.contributor.committeeMemberDontsov, Egor
dc.creatorWitarto, Fnu
dc.date.accessioned2020-01-07T13:45:54Z
dc.date.createdDecember 2018
dc.date.issued2018-12
dc.date.submittedDecember 2018
dc.date.updated2020-01-07T13:45:57Z
dc.description.abstractImportant structures such as nuclear power plants should experience very little vibrations in order to maintain the safety of the nuclear facilities during seismic events. Protection of these structures by seismic isolators requires the isolators to provide seismic isolation irrespective of the direction of excitations and to develop a stable response without rocking. Conventional seismic isolation systems, however, can only fulfill partial requirements for the seismic protection. This study adopts the principle of periodic materials for seismic isolation. These materials exhibit unique properties of frequency band gaps, where incoming waves with frequencies falling inside the frequency band gaps are forbidden. The new isolation systems, known as periodic foundations, function both as a structural foundation to support the gravitational weight of the superstructure and also as a seismic isolator. The isolation mechanism, hypothetically, can easily fulfill all the requirements for seismic protection of the critical facilities. This study focuses on the design of one-dimensional (1D) and three-dimensional (3D) periodic foundations for seismic isolation of small modular reactor (SMR) buildings. The theoretical study was first conducted to reveal the fundamental behavior of periodic foundations. Then global sensitivity analysis was utilized to study the effect of design parameters on the frequency band gaps. In addition, simple straight-forward design equations based on the sensitivity analysis are proposed for the design of periodic foundations. Utilizing the proposed equations, prototypes of 1D and 3D periodic foundations were designed to isolate an SMR building. Scaled models were fabricated and experimentally tested to validate the hypothesis and design. The periodic foundation structural systems were tested under various input waves, including seismic waves, in the horizontal and vertical directions and the torsional mode. The shake table test results show that the periodic foundations can reduce the acceleration response of the SMR building up to 90% in the horizontal direction and the torsional mode. As much as a 40% response reduction in the vertical direction is also observed. Moreover, the periodic foundation-isolated structure exhibited stable response with negligible rocking on the structure. This study proved the capability of periodic foundations to enhance the seismic safety of critical structures.
dc.description.departmentCivil and Environmental Engineering, Department of
dc.format.digitalOriginborn digital
dc.format.mimetypeapplication/pdf
dc.identifier.citationPortions of this document appear in: Witarto, Witarto, S. J. Wang, C. Y. Yang, Xin Nie, Y. L. Mo, K. C. Chang, Yu Tang, and Robert Kassawara. "Seismic isolation of small modular reactors using metamaterials." AIP Advances 8, no. 4 (2018): 045307.
dc.identifier.urihttps://hdl.handle.net/10657/5842
dc.language.isoeng
dc.rightsThe author of this work is the copyright owner. UH Libraries and the Texas Digital Library have their permission to store and provide access to this work. UH Libraries has secured permission to reproduce any and all previously published materials contained in the work. Further transmission, reproduction, or presentation of this work is prohibited except with permission of the author(s).
dc.subjectPeriodic foundations
dc.subjectPeriodic materials
dc.subjectPhononic crystals
dc.subjectSeismic isolation
dc.subjectShake table tests
dc.subjectSobol' sensitivity analysis
dc.titlePeriodic Materials for Seismic Base Isolation: Theory and Applications to Small Modular Reactors
dc.type.dcmiText
dc.type.genreThesis
local.embargo.lift2020-12-01
local.embargo.terms2020-12-01
thesis.degree.collegeCullen College of Engineering
thesis.degree.departmentCivil and Environmental Engineering, Department of
thesis.degree.disciplineCivil Engineering
thesis.degree.grantorUniversity of Houston
thesis.degree.levelDoctoral
thesis.degree.nameDoctor of Philosophy

Files

Original bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
WITARTO-DISSERTATION-2018.pdf
Size:
68.23 MB
Format:
Adobe Portable Document Format

License bundle

Now showing 1 - 2 of 2
No Thumbnail Available
Name:
PROQUEST_LICENSE.txt
Size:
4.43 KB
Format:
Plain Text
Description:
No Thumbnail Available
Name:
LICENSE.txt
Size:
1.81 KB
Format:
Plain Text
Description: