Browsing by Title
Now showing items 2519-2538 of 6695
-
Fabrication and Characterization of Bioactive Conjugated Polymer 3D Microstructures for Organic Bioelectronics
(2019-05)The emerging field of organic bioelectronics bridges the electronic world of organic based devices with the soft and predominantly ionic world of biology. This crosstalk can occur in both directions. For example, a biochemical ... -
Fabrication and Design of Sub-Wavelength Periodic Textures for Improving Light Harvesting in Multi-Junction III-V Photovoltaics
(December 2)Optimization of non-planar antireflective coating and back- (or front-) surface texturing are widely studied to further reduce the reflection losses and increase the sunlight absorption path in solar cells. In III-V ... -
Fabrication and Electromechanical Study of Symmetric Tape Round (STAR) REBCO Wires
(2019-05)High temperature superconducting (HTS) materials are essential for applications that require to operate at magnetic fields higher than 20 T. In commonly used HTS materials, Rare-Earth1Ba2Cu3O7-x (REBCO) coated conductor ... -
Fabrication and Investigation of Conducting Polymer Micro and Nano Structures for Bioelectronics Applications
(May 2018)Conducting polymers (CPs), especially poly(3,4-ethylenedioxythiophthene) (PEDOT) and poly(pyrrole) (PPy), are ideal materials for bioelectronics devices because of their biocompatibility, mechanical properties that are ... -
Fabrication and Optimization of Dp44mT-loaded Polymeric Nanoparticles for Treatment of Malignant Cells
(2020-05)Cancer is the second leading cause of mortality worldwide, resulting in over eight million deaths per year. In the fight against cancer, traditional chemotherapeutics are not very effective due to poor delivery, toxicity ... -
Fabrication and Optimization of Single-Junction GaAs Thin Film Solar Cells on Epi-ready Flexible Metal Tapes for Low-cost Photovoltaics
(2019-08)Properties like high efficiency, flexibility and light weight, resistance to UV radiation and moisture and a low temperature coefficient make gallium arsenide (GaAs) more favorable than the ubiquitously-used silicon for ... -
Fabrication and Properties of III-Nitride Piezoelectric Pressure Sensors
(August 201)In this thesis, we utilize gallium nitride (GaN) and aluminum nitride (AlN) as the sensing element of piezoelectric pressure sensor because its stable piezoelectric coefficient d_33, high rigidity and high serving temperature. ... -
Fabrication Development Of Micron Scale Retroreflector Assays Using Wet Etching
(2013-08)We are developing a new ultra-sensitive pathogen detection platform for rapid, point-of-care diagnostics. The platform uses micron-scale retroreflecting surfaces to allow for accurate and automated detection of virus and/or ... -
Fabrication of close-packed non-circular nanomagnetic pattern using low energy self-limiting ion-milling process
(2013-05)We describe a low energy glow discharge process using a reactive-ion etching system that enables non-circular device patterns, such as squares or hexagons, to be formed from the precursor arrays of uniform circular openings ... -
Fabrication of Multi-point Side-Firing Optical Fiber by Laser Micro- ablation
(Optics Letters, 1/16/2018)A multipoint, side-firing design enables an optical fiber to output light at multiple desired locations along the fiber body. This provides advantages over traditional end-to-end fibers, especially in applications requiring ... -
Face Recognition in the presence of variance in Pose, Expression, and Occlusions
(2019-05)Face recognition is a technology in which a computing device either classifies a human identity based on a facial image or verifies whether two images belong to the same subject. The recent advances have achieved remarkable ... -
Face Recognition in Unconstrained Conditions: Improving Face Alignment and Constructing a Pose-Invariant Compact Biometric Template
(2018-12)Face recognition has been significantly advanced in the past decade; however, challenges remain under unconstrained conditions regarding variations in pose, illumination, and occlusion. Existing solutions tackle the ... -
Facies and Morphology of Pleistocene Travertine Mounds at Lyman Lake, Arizona
(December 2)Travertine mounds in eastern Arizona formed around central vents and range from <10 m to 50 m in diameter and between 0.5-60 m thick. The travertine mounds are primarily composed of laterally extensive sheets of rhythmically ... -
Facies and stratigraphic framework of the Eagle Ford Shale in South Texas
(2013-05)The Upper Cretaceous Eagle Ford Shale, in South and East Texas, consists of organic matter-rich fossiliferous marine shale. It is one of the most actively drilled targets for oil and gas in the United States, due to new ... -
FACIES ARCHITECTURAL STUDY OF INCISED VALLEYS, DISTRIBUTARY CHANNELS, AND MOUTH BARS IN THE CRETACEOUS FERRON NOTOM DELTA, SOUTHERN CENTRAL UTAH, USA.
(2012-12)This dissertation is focused on analysing architectural elements to understand the formative processes in linked fluvial and deltaic depositional systems in an ancient system. A compound incised valley system (IVS) and ... -
Facies Architecture, and Controls on Channel-belt Geometry: Cretaceous-Ferron Notom Delta, Utah, U.S.A.
(2013-05)Examination of fluvial deposits of the Late Cretaceous (Turonian) Ferron Sandstone Member, within the Mancos Shale Formation, in Central Utah (along Sweetwater Wash) was done to interpret fluvial style, characterize avulsion, ... -
Facies Architecture, Paleo-hydraulics and Fluvial Style of a Falling Stage Terrace Deposit within a Compound Incised Valley System, Ferron Notom Delta, Utah
(2013-05)Incised valley systems are important because they contain significant hydrocarbon reserves, provide clues into the geologic history of a region, and are crucial for sequence stratigraphic interpretations. The fluvial/deltaic ... -
Facilitating Prosocial Skills in Early Childhood Classrooms
(2016-12)As the population increases, more and more children are entering schools at an early age. These young children often begin their formal schooling in one of the various types of early childhood education (ECE) programs, ... -
Facility Location and Relocation Problem: Models and Decomposition Algorithms
(2012-05)We consider the facility location and relocation problem (FLRP). Due to demand change in this problem, we may need to close some existing facilities from low demand areas and open new ones in newly emerging areas. Specifically, ... -
Factor Structure and Validity of the Lesbian, Gay, and Bisexual Knowledge and Attitude Scale for Heterosexuals (LGB-KASH)
(2010-08)Heterosexual attitudes toward Lesbian, Gay, and Bisexual (LGB) individuals have become the focus of recent research as sexual minorities and allies have advocated for LGB human rights issues and have subsequently captured ...